TPU tooth socket introduction:
The invisible appliance made of safe and transparent elastic polymer material is used for treatment. Compared with the traditional fixed appliance, it does not need bracket and steel wire, the clinical operation is greatly simplified, the correction
process is time-saving and labor-saving, and the whole treatment process can be completed without others’ awareness, without affecting daily life and social interaction. Invisible orthodontics is a high and new science and technology in the field of Orthodontics, which breaks the limitations of traditional orthodontics. JWELL supplies whole line for TPU tooth socket sheet extrusion line
| Model | Products width(mm) | Products thickness(mm) | Capacity(kg/h) |
|---|---|---|---|
| JWS75/JWS120 | 1000-3000 | 0.02-2.0 | 300-350 |
| JWS90/JWS90/JWS90 | 1000-3000 | 0.02-2.0 | 200-300 |
| JWS65/JWS120/JWS65 | 1000-3000 | 0.02-2.0 | 300-400 |
Application for TPU film in medical:
TPU material features excellent kink resistance, elasticity and flexibility. The internal pressure resistance is much higher than that of PVC, the transparency is better than that of PVC / EVA and TPO, high chemical resistance. Gamma ray and ETO can be used for sterilization, the drug adsorption is low and easy to bond. It is an ideal material for manufacturing a variety of medical equipment, including various infusion tubes, infusion tube drip, implants and other short-term applications.
Developed by Jwell company, this line is for producing multi-layer environmental-friendly sheet, which is widely used for vacuum forming, green food container and package, different kinds of food packaging container, such as: salver,bowl, canteen, fruit dish, etc. Adopting maxim talc percentage in the sheet production, either customer will be able to reduce the cost of the sheet or increase the sheet degration character as well as gaining good physical properties and further processing abilities.
| Model | JWS150/120/90-1800 | JWS150/60-1200 | JWS130/60-1000 | JWS120-1000 | JWS100-800 |
|---|---|---|---|---|---|
| Width | 1500mm | 1000mm | 900mm | 800mm | 600mm |
| Thickness | 0.3-2mm | 0.3-2mm | 0.3-2mm | 0.2-2mm | 0.1-0.8mm |
| Capacity | 1000-1200kg/h | 700-800kg/h | 550-600kg/h | 400-500kg/h | 300-350kg/h |
PC Endurance Board, Wave Board
Scope of application: The Garden, the Amusement Place Strange Decoration and the rest place porch pavilion; the commercial building interior and exterior decoration, the modern city building curtain wall; Transparent Air Containers, motorcycle windshields, aircraft, trains, ships, cars, automobiles, submarines and glass military and police shields; Phone Booth, Advertising Road Signs, light box advertising display display display display layout; Noise barriers on expressways and urban viaducts.
ABS, HIPS/GPPS Refrigerator board
The utility model is mainly used for the door and gallbladder of the refrigerator, the inner liner, the drawer, the water receiving plate, the water dispenser, etc. .
ABS/PMMA Sanitaryware plate Composite Sanitary Board
For sanitary products such as: Bathtub, shower room, steam room, Sink./n/n
ABS/PC Baggage plate Composite Board
Mainly used for all kinds of luggage, luggage, leisure bags and so on.
ABS、ABS + PC Car plate Alloy Sheet
Main uses: Car Roof, Instrument Panel; seat panel, door panel, window frame; motorcycle, dune buggy, Scooter, golf cart and other shell.
| Model | JWS130/38-2200 | JWS120/38-1400 |
|---|---|---|
| Material | PC, PMMA, GPPS, ABS | PC, PMMA, GPPS, ABS |
| Products Width | 2200mm | 1400mm |
| Products Thickness | 1.5-10mm | 1.5-10mm |
| Extruder Specification | Ø130/38；Ø45/30 | Ø120/38 |
| Capacity (Max.) | 550Kg/h | 450Kg/h |
·Suitable for producing different kinds of car urea box, tool box, automotive seat, auto air duct, auto flow board, bumper and Car Spoilers.
·Adopt high output extrusion system,accumulating die head.
·According to the different material, optional JW-DB single station hydraulic screen-exchanger system.
·According to the different product size, customized the platen type and size.
·Optinal hydraulic servo control system.
·Optinal bottom sealing,take-out robot.
| Model | Unit | BM30 | BM50 | BM100 | BM160 |
|---|---|---|---|---|---|
| Max product volume | L | 30 | 50 | 100 | 160 |
| Dry cycle | Pc/h | 600 | 450 | 360 | 300 |
In order to be environmentally friendly and suitable for different production requirements and crushing objects, DYUN launched the DYSSQ light shredder. It is suitable for shredding and recycling of gates, plastic thick board, building template, plastic films and various blow-molding containers produced during injection molding, blow molding and extrusion. According to the different feeding methods and recycling of the site, conveyors and crushers can be equipped. This shredder has low-speed rotary cutter, and is of low noise, high output and more energy saving.
| Model | Rotor Dia. | Drive power | Rotor Blade | Fixed Blade | Crushing Chamber Size Max |
|---|---|---|---|---|---|
| DYSSQ-1000 | Φ400 | 22×2 | 54 | 5 | 850×1300×350 |
| DYSSQ-1400 | Φ630 | 37×2 | 102 | 7 | 1200×1300×550 |
Application：
This machine is mainly used for spinning 30-330dtex polyester POY.
Adopts LTM type pin screw, domestic-made continuous melt CPF, thus extend the service life of spin packs.
Both top-mounted and bottom-mounted high-pressure rectangular and cup-shaped spin packs are available.
Unique planetary spinning pump and separately driving finish oil pump.
Evo and cross quench system with equably and stable flowing speed.
Individually controlled, imported inverter and components.
New adjustment GR, imported inverter and components.
Main features：
This machine is mainly used for chips spinning of PA6 and PA66.
Adopt new type of bimetal, barrel and special manifold design. Energy saving spin beam, equipped with botton mounted, high pressure cylinder spin pack.
Unique planetary spinning pump and separately driving finish oil pump. With well designed air suctivice for monomer.
Uniform front dismountable quenching chamber and unique nozzle type oil adding device.
Equipped with precision winding and high speed automatic winders, high succssfully of doffing, fineless of yarn shape, and good function of unwinding.
| Model | Rotor Dia. | Drive power | Rotor Blade | Fixed Blade | Crushing Chamber Size Max |
|---|---|---|---|---|---|
| DYSSQ-1000 | Φ400 | 22×2 | 54 | 5 | 850×1300×350 |
| DYSSQ-1400 | Φ630 | 37×2 | 102 | 7 | 1200×1300×550 |
In order to be environmentally friendly and suitable for different production requirements and crushing objects, DYUN launched the DYSSQ light shredder. It is suitable for shredding and recycling of gates, plastic thick board, building template, plastic films and various blow-molding containers produced during injection molding, blow molding and extrusion. According to the different feeding methods and recycling of the site, conveyors and crushers can be equipped. This shredder has low-speed rotary cutter, and is of low noise, high output and more energy saving.
| Model | Rotor Dia. | Drive power | Rotor Blade | Fixed Blade | Crushing Chamber Size Max |
|---|---|---|---|---|---|
| DYSSQ-1000 | Φ400 | 22×2 | 54 | 5 | 850×1300×350 |
| DYSSQ-1400 | Φ630 | 37×2 | 102 | 7 | 1200×1300×550 |
In order to be environmentally friendly and suitable for different production requirements and crushing objects, DYUN launched the DYSSQ light shredder. It is suitable for shredding and recycling of gates, plastic thick board, building template, plastic films and various blow-molding containers produced during injection molding, blow molding and extrusion. According to the different feeding methods and recycling of the site, conveyors and crushers can be equipped. This shredder has low-speed rotary cutter, and is of low noise, high output and more energy saving.
| Model | Rotor Dia. | Drive power | Rotor Blade | Fixed Blade | Crushing Chamber Size Max |
|---|---|---|---|---|---|
| DYSSQ-1000 | Φ400 | 22×2 | 54 | 5 | 850×1300×350 |
| DYSSQ-1400 | Φ630 | 37×2 | 102 | 7 | 1200×1300×550 |
In order to be environmentally friendly and suitable for different production requirements and crushing objects, DYUN launched the DYSSQ light shredder. It is suitable for shredding and recycling of gates, plastic thick board, building template, plastic films and various blow-molding containers produced during injection molding, blow molding and extrusion. According to the different feeding methods and recycling of the site, conveyors and crushers can be equipped. This shredder has low-speed rotary cutter, and is of low noise, high output and more energy saving.
| Model | Rotor Dia. | Drive power | Rotor Blade | Fixed Blade | Crushing Chamber Size Max |
|---|---|---|---|---|---|
| DYSSQ-1000 | Φ400 | 22×2 | 54 | 5 | 850×1300×350 |
| DYSSQ-1400 | Φ630 | 37×2 | 102 | 7 | 1200×1300×550 |
Don’t miss our future updates! Get Subscribed Today!
©2023. Logimachine All Rights Reserved.